Happy Codings - Programming Code Examples
Html Css Web Design Sample Codes CPlusPlus Programming Sample Codes JavaScript Programming Sample Codes C Programming Sample Codes CSharp Programming Sample Codes Java Programming Sample Codes Php Programming Sample Codes Visual Basic Programming Sample Codes


C Programming Code Examples

C > C on Unix Code Examples

Implementing cat command using system calls

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
/* Implementing cat command using system calls */ #include<stdio.h> #include<fcntl.h> #include<unistd.h> #include<sys/stat.h> #include<sys/types.h> int main(int argc,char *argv[]) { int f=0,n; char l[80]; struct stat s; if(argc!=2) { printf("Mismatch argument"); exit(1); } if(access(argv[1],F_OK)) { printf("File Exist"); exit(1); } if(stat(argv[1],&s)<0) { printf("Stat ERROR"); exit(1); } if(S_ISREG(s.st_mode)<0) { printf("Not a Regular FILE"); exit(1); } if(geteuid()==s.st_uid) if(s.st_mode & S_IRUSR) f=1; else if(getegid()==s.st_gid) if(s.st_mode & S_IRGRP) f=1; else if(s.st_mode & S_IROTH) f=1; if(!f) { printf("Permission denied"); exit(1); } f=open(argv[1],O_RDONLY); while((n=read(f,l,80))>0) write(1,l,n); }
write() Function in C
Write to a file descriptor. write() writes up to count bytes from the buffer pointed buf to the file referred to by the file descriptor fd. The number of bytes written may be less than count if, for example, there is insufficient space on the underlying physical medium, or the RLIMIT_FSIZE resource limit is encountered, or the call was interrupted by a signal handler after having written less than count bytes. For a seekable file (i.e., one to which lseek may be applied, for example, a regular file) writing takes place at the current file offset, and the file offset is incremented by the number of bytes actually written. If the file was opened with O_APPEND, the file offset is first set to the end of the file before writing. The adjustment of the file offset and the write operation are performed as an atomic step.
Syntax for write() Function in C
#include <unistd.h> ssize_t write(int fd, const void *buf, size_t count);
fd
It is the file descriptor which has been obtained from the call to open. It is an integer value. The values 0, 1, 2 can also be given, for standard input, standard output & standard error, respectively .
buf
It points to a character array, which can be used to store content obtained from the file pointed to by fd.
count
It specifies the number of bytes to be written from the file into the character array. POSIX requires that a read which can be proved to occur after a write() has returned returns the new data. Note that not all file systems are POSIX conforming. On success, the number of bytes written is returned (zero indicates nothing was written). On error, -1 is returned, and errno is set appropriately. If count is zero and fd refers to a regular file, then write() may return a failure status if one of the errors below is detected. If no errors are detected, 0 will be returned without causing any other effect. If count is zero and fd refers to a file other than a regular file, the results are not specified.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
/* write to a file descriptor by write() function code example */ // C program to illustrate // I/O system Calls #include<stdio.h> #include<string.h> #include<unistd.h> #include<fcntl.h> int main (void) { int fd[2]; char buf1[12] = "hello world"; char buf2[12]; // assume foobar.txt is already created fd[0] = open("foobar.txt", O_RDWR); fd[1] = open("foobar.txt", O_RDWR); write(fd[0], buf1, strlen(buf1)); write(1, buf2, read(fd[1], buf2, 12)); close(fd[0]); close(fd[1]); return 0; }
If Else If Ladder in C/C++
The if...else statement executes two different codes depending upon whether the test expression is true or false. Sometimes, a choice has to be made from more than 2 possibilities. The if...else ladder allows you to check between multiple test expressions and execute different statements. In C/C++ if-else-if ladder helps user decide from among multiple options. The C/C++ if statements are executed from the top down. As soon as one of the conditions controlling the if is true, the statement associated with that if is executed, and the rest of the C else-if ladder is bypassed. If none of the conditions is true, then the final else statement will be executed.
Syntax of if...else Ladder in C
if (Condition1) { Statement1; } else if(Condition2) { Statement2; } . . . else if(ConditionN) { StatementN; } else { Default_Statement; }
In the above syntax of if-else-if, if the Condition1 is TRUE then the Statement1 will be executed and control goes to next statement in the program following if-else-if ladder. If Condition1 is FALSE then Condition2 will be checked, if Condition2 is TRUE then Statement2 will be executed and control goes to next statement in the program following if-else-if ladder. Similarly, if Condition2 is FALSE then next condition will be checked and the process continues. If all the conditions in the if-else-if ladder are evaluated to FALSE, then Default_Statement will be executed.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/* write a C program which demonstrate use of if-else-if ladder statement */ #include<stdio.h> #include<conio.h> void main() { int a; printf("Enter a Number: "); scanf("%d",&a); if(a > 0) { printf("Given Number is Positive"); } else if(a == 0) { printf("Given Number is Zero"); } else if(a < 0) { printf("Given Number is Negative"); } getch(); }
#include Directive in C
#include is a way of including a standard or user-defined file in the program and is mostly written at the beginning of any C/C++ program. This directive is read by the preprocessor and orders it to insert the content of a user-defined or system header file into the following program. These files are mainly imported from an outside source into the current program. The process of importing such files that might be system-defined or user-defined is known as File Inclusion. This type of preprocessor directive tells the compiler to include a file in the source code program. Here are the two types of file that can be included using #include: • Header File or Standard files: This is a file which contains C/C++ function declarations and macro definitions to be shared between several source files. Functions like the printf(), scanf(), cout, cin and various other input-output or other standard functions are contained within different header files. So to utilise those functions, the users need to import a few header files which define the required functions. • User-defined files: These files resembles the header files, except for the fact that they are written and defined by the user itself. This saves the user from writing a particular function multiple times. Once a user-defined file is written, it can be imported anywhere in the program using the #include preprocessor.
Syntax for #include Directive in C
#include "user-defined_file"
Including using " ": When using the double quotes(" "), the preprocessor access the current directory in which the source "header_file" is located. This type is mainly used to access any header files of the user's program or user-defined files.
#include <header_file>
Including using <>: While importing file using angular brackets(<>), the the preprocessor uses a predetermined directory path to access the file. It is mainly used to access system header files located in the standard system directories.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/* #include directive tells the preprocessor to insert the contents of another file into the source code at the point where the #include directive is found. */ // C program to illustrate file inclusion // <> used to import system header file #include <stdio.h> // " " used to import user-defined file #include "process.h" // main function int main() { // add function defined in process.h add(10, 20); // mult function defined in process.h multiply(10, 20); // printf defined in stdio.h printf("Process completed"); return 0; }
open() Function in C
The open() function shall establish the connection between a file and a file descriptor. It shall create an open file description that refers to a file and a file descriptor that refers to that open file description. The file descriptor is used by other I/O functions to refer to that file. The path argument points to a pathname naming the file. The open() function shall return a file descriptor for the named file that is the lowest file descriptor not currently open for that process. The open file description is new, and therefore the file descriptor shall not share it with any other process in the system. The FD_CLOEXEC file descriptor flag associated with the new file descriptor shall be cleared.
Syntax for open() Function in C
#include <fcntl.h> int open(const char *path, int oflag, ... );
path
path to file which you want to use
oflag
How you like to use The file offset used to mark the current position within the file shall be set to the beginning of the file. The file status flags and file access modes of the open file description shall be set according to the value of oflag. Values for oflag are constructed by a bitwise-inclusive OR of flags from the following list, defined in <fcntl.h>. Applications shall specify exactly one of the first three values (file access modes) below in the value of oflag:
O_RDONLY
Open for reading only.
O_WRONLY
Open for writing only.
O_RDWR
Open for reading and writing. The result is undefined if this flag is applied to a FIFO. Any combination of the following may be used:
O_APPEND
If set, the file offset shall be set to the end of the file prior to each write.
O_CREAT
If the file exists, this flag has no effect except as noted under O_EXCL below. Otherwise, the file shall be created; the user ID of the file shall be set to the effective user ID of the process; the group ID of the file shall be set to the group ID of the file's parent directory or to the effective group ID of the process; and the access permission bits (see <sys/stat.h>) of the file mode shall be set to the value of the third argument taken as type mode_t modified as follows: a bitwise AND is performed on the file-mode bits and the corresponding bits in the complement of the process' file mode creation mask. Thus, all bits in the file mode whose corresponding bit in the file mode creation mask is set are cleared. When bits other than the file permission bits are set, the effect is unspecified. The third argument does not affect whether the file is open for reading, writing, or for both. Implementations shall provide a way to initialize the file's group ID to the group ID of the parent directory. Implementations may, but need not, provide an implementation-defined way to initialize the file's group ID to the effective group ID of the calling process.
O_DSYNC
Write I/O operations on the file descriptor shall complete as defined by synchronized I/O data integrity completion.
O_EXCL
If O_CREAT and O_EXCL are set, open() shall fail if the file exists. The check for the existence of the file and the creation of the file if it does not exist shall be atomic with respect to other threads executing open() naming the same filename in the same directory with O_EXCL and O_CREAT set. If O_EXCL and O_CREAT are set, and path names a symbolic link, open() shall fail and set errno to [EEXIST], regardless of the contents of the symbolic link. If O_EXCL is set and O_CREAT is not set, the result is undefined.
O_NOCTTY
If set and path identifies a terminal device, open() shall not cause the terminal device to become the controlling terminal for the process.
O_NONBLOCK
When opening a FIFO with O_RDONLY or O_WRONLY set: • If O_NONBLOCK is set, an open() for reading-only shall return without delay. An open() for writing-only shall return an error if no process currently has the file open for reading. • If O_NONBLOCK is clear, an open() for reading-only shall block the calling thread until a thread opens the file for writing. An open() for writing-only shall block the calling thread until a thread opens the file for reading. When opening a block special or character special file that supports non-blocking opens: • If O_NONBLOCK is set, the open() function shall return without blocking for the device to be ready or available. Subsequent behavior of the device is device-specific. • If O_NONBLOCK is clear, the open() function shall block the calling thread until the device is ready or available before returning. Otherwise, the behavior of O_NONBLOCK is unspecified.
O_RSYNC
Read I/O operations on the file descriptor shall complete at the same level of integrity as specified by the O_DSYNC and O_SYNC flags. If both O_DSYNC and O_RSYNC are set in oflag, all I/O operations on the file descriptor shall complete as defined by synchronized I/O data integrity completion. If both O_SYNC and O_RSYNC are set in flags, all I/O operations on the file descriptor shall complete as defined by synchronized I/O file integrity completion.
O_SYNC
Write I/O operations on the file descriptor shall complete as defined by synchronized I/O file integrity completion.
O_TRUNC
If the file exists and is a regular file, and the file is successfully opened O_RDWR or O_WRONLY, its length shall be truncated to 0, and the mode and owner shall be unchanged. It shall have no effect on FIFO special files or terminal device files. Its effect on other file types is implementation-defined. The result of using O_TRUNC with O_RDONLY is undefined. If O_CREAT is set and the file did not previously exist, upon successful completion, open() shall mark for update the st_atime, st_ctime, and st_mtime fields of the file and the st_ctime and st_mtime fields of the parent directory. If O_TRUNC is set and the file did previously exist, upon successful completion, open() shall mark for update the st_ctime and st_mtime fields of the file. If both the O_SYNC and O_DSYNC flags are set, the effect is as if only the O_SYNC flag was set. If path refers to a STREAMS file, oflag may be constructed from O_NONBLOCK OR'ed with either O_RDONLY, O_WRONLY, or O_RDWR. Other flag values are not applicable to STREAMS devices and shall have no effect on them. The value O_NONBLOCK affects the operation of STREAMS drivers and certain functions applied to file descriptors associated with STREAMS files. For STREAMS drivers, the implementation of O_NONBLOCK is device-specific. If path names the master side of a pseudo-terminal device, then it is unspecified whether open() locks the slave side so that it cannot be opened. Conforming applications shall call unlockpt() before opening the slave side. The largest value that can be represented correctly in an object of type off_t shall be established as the offset maximum in the open file description. Upon successful completion, the function shall open the file and return a non-negative integer representing the lowest numbered unused file descriptor. Otherwise, -1 shall be returned and errno set to indicate the error. No files shall be created or modified if the function returns -1. The open() function shall fail if:
EACCES
Search permission is denied on a component of the path prefix, or the file exists and the permissions specified by oflag are denied, or the file does not exist and write permission is denied for the parent directory of the file to be created, or O_TRUNC is specified and write permission is denied.
EEXIST
O_CREAT and O_EXCL are set, and the named file exists.
EINTR
A signal was caught during open().
EINVAL
The implementation does not support synchronized I/O for this file.
EIO
The path argument names a STREAMS file and a hangup or error occurred during the open().
EISDIR
The named file is a directory and oflag includes O_WRONLY or O_RDWR.
ELOOP
A loop exists in symbolic links encountered during resolution of the path argument.
EMFILE
{OPEN_MAX} file descriptors are currently open in the calling process.
ENAMETOOLONG
The length of the path argument exceeds {PATH_MAX} or a pathname component is longer than {NAME_MAX}.
ENFILE
The maximum allowable number of files is currently open in the system.
ENOENT
O_CREAT is not set and the named file does not exist; or O_CREAT is set and either the path prefix does not exist or the path argument points to an empty string.
ENOSR
The path argument names a STREAMS-based file and the system is unable to allocate a STREAM.
ENOSPC
The directory or file system that would contain the new file cannot be expanded, the file does not exist, and O_CREAT is specified.
ENOTDIR
A component of the path prefix is not a directory.
ENXIO
O_NONBLOCK is set, the named file is a FIFO, O_WRONLY is set, and no process has the file open for reading.
ENXIO
The named file is a character special or block special file, and the device associated with this special file does not exist.
EOVERFLOW
The named file is a regular file and the size of the file cannot be represented correctly in an object of type off_t.
EROFS
The named file resides on a read-only file system and either O_WRONLY, O_RDWR, O_CREAT (if the file does not exist), or O_TRUNC is set in the oflag argument. The open() function may fail if:
EAGAIN
The path argument names the slave side of a pseudo-terminal device that is locked.
EINVAL
The value of the oflag argument is not valid.
ELOOP
More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.
ENAMETOOLONG
As a result of encountering a symbolic link in resolution of the path argument, the length of the substituted pathname string exceeded {PATH_MAX}.
ENOMEM
The path argument names a STREAMS file and the system is unable to allocate resources.
ETXTBSY
The file is a pure procedure (shared text) file that is being executed and oflag is O_WRONLY or O_RDWR.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/* open or create a file for reading, writing or executing by open() function code example */ // C program to illustrate // open system call #include<stdio.h> #include<fcntl.h> #include<errno.h> extern int errno; int main() { // if file does not have in directory // then file foo.txt is created. int fd = open("foo.txt", O_RDONLY | O_CREAT); printf("fd = %d/n", fd); if (fd ==-1) { // print which type of error have in a code printf("Error Number % d\n", errno); // print program detail "Success or failure" perror("Program"); } return 0; }
main() Function in C
In C, the "main" function is treated the same as every function, it has a return type (and in some cases accepts inputs via parameters). The only difference is that the main function is "called" by the operating system when the user runs the program. Thus the main function is always the first code executed when a program starts. main() function is a user defined, body of the function is defined by the programmer or we can say main() is programmer/user implemented function, whose prototype is predefined in the compiler. Hence we can say that main() in c programming is user defined as well as predefined because it's prototype is predefined. main() is a system (compiler) declared function whose defined by the user, which is invoked automatically by the operating system when program is being executed. Its first function or entry point of the program from where program start executed, program's execution starts from the main. So main is an important function in c , c++ programming language.
Syntax for main() Function in C
void main() { ......... // codes start from here ......... }
void
is a keyword in C language, void means nothing, whenever we use void as a function return type then that function nothing return. here main() function no return any value. In place of void we can also use int return type of main() function, at that time main() return integer type value.
main
is a name of function which is predefined function in C library. • An operating system always calls the main() function when a programmers or users execute their programming code. • It is responsible for starting and ends of the program. • It is a universally accepted keyword in programming language and cannot change its meaning and name. • A main() function is a user-defined function in C that means we can pass parameters to the main() function according to the requirement of a program. • A main() function is used to invoke the programming code at the run time, not at the compile time of a program. • A main() function is followed by opening and closing parenthesis brackets.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
/* basic c program by main() function example */ #include <stdio.h> #include <conio.h> main() { printf (" It is a main() function "); int fun2(); // jump to void fun1() function printf ("\n Finally exit from the main() function. "); } void fun1() { printf (" It is a second function. "); printf (" Exit from the void fun1() function. "); } int fun2() { void fun1(); // jump to the int fun1() function printf (" It is a third function. "); printf (" Exit from the int fun2() function. "); return 0; }
read() Function in C
read() attempts to read up to count bytes from file descriptor fd into the buffer starting at buf. On files that support seeking, the read operation commences at the file offset, and the file offset is incremented by the number of bytes read. If the file offset is at or past the end of file, no bytes are read, and read() returns zero.
Syntax for read() Function in C
#include <unistd.h> ssize_t read(int fs, void *buf, size_t N);
fs
The file or socket descriptor.
buf
The pointer to the buffer that receives the data.
N
The length in bytes of the buffer pointed to by the buf parameter. If count is zero, read() may detect the errors described below. In the absence of any errors, or if read() does not check for errors, a read() with a count of 0 returns zero and has no other effects. According to POSIX.1, if count is greater than SSIZE_MAX, the result is implementation-defined; see NOTES for the upper limit on Linux. On success, the number of bytes read is returned (zero indicates end of file), and the file position is advanced by this number. It is not an error if this number is smaller than the number of bytes requested; this may happen for example because fewer bytes are actually available right now (maybe because we were close to end-of-file, or because we are reading from a pipe, or from a terminal), or because read() was interrupted by a signal. On error, -1 is returned, and errno is set to indicate the error. In this case, it is left unspecified whether the file position (if any) changes.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/* read from a file or socket by read() function code example */ // C program to illustrate // I/O system Calls #include<stdio.h> #include<string.h> #include<unistd.h> #include<fcntl.h> int main (void) { int fd[2]; char buf1[12] = "hello world"; char buf2[12]; // assume foobar.txt is already created fd[0] = open("foobar.txt", O_RDWR); fd[1] = open("foobar.txt", O_RDWR); write(fd[0], buf1, strlen(buf1)); write(1, buf2, read(fd[1], buf2, 12)); close(fd[0]); close(fd[1]); return 0; }
printf() Function in C
Writes the C string pointed by format to the standard output (stdout). If format includes format specifiers (subsequences beginning with %), the additional arguments following format are formatted and inserted in the resulting string replacing their respective specifiers. printf format string refers to a control parameter used by a class of functions in the input/output libraries of C programming language. The string is written in a simple template language: characters are usually copied literally into the function's output, but format specifiers, which start with a % character, indicate the location and method to translate a piece of data (such as a number) to characters. "printf" is the name of one of the main C output functions, and stands for "print formatted". printf format strings are complementary to scanf format strings, which provide formatted input (parsing). In both cases these provide simple functionality and fixed format compared to more sophisticated and flexible template engines or parsers, but are sufficient for many purposes.
Syntax for printf() function in C
#include <stdio.h> int printf ( const char * format, ... );
format
C string that contains the text to be written to stdout. It can optionally contain embedded format specifiers that are replaced by the values specified in subsequent additional arguments and formatted as requested. A format specifier follows this prototype: [see compatibility note below] %[flags][width][.precision][length]specifier Where the specifier character at the end is the most significant component, since it defines the type and the interpretation of its corresponding argument:
specifier
a conversion format specifier.
d or i
Signed decimal integer
u
Unsigned decimal integer
o
Unsigned octal
x
Unsigned hexadecimal integer
X
Unsigned hexadecimal integer (uppercase)
f
Decimal floating point, lowercase
F
Decimal floating point, uppercase
e
Scientific notation (mantissa/exponent), lowercase
E
Scientific notation (mantissa/exponent), uppercase
g
Use the shortest representation: %e or %f
G
Use the shortest representation: %E or %F
a
Hexadecimal floating point, lowercase
A
Hexadecimal floating point, uppercase
c
Character
s
String of characters
p
Pointer address
n
Nothing printed. The corresponding argument must be a pointer to a signed int. The number of characters written so far is stored in the pointed location.
%
A % followed by another % character will write a single % to the stream. The format specifier can also contain sub-specifiers: flags, width, .precision and modifiers (in that order), which are optional and follow these specifications:
flags
one or more flags that modifies the conversion behavior (optional)
-
Left-justify within the given field width; Right justification is the default (see width sub-specifier).
+
Forces to preceed the result with a plus or minus sign (+ or -) even for positive numbers. By default, only negative numbers are preceded with a - sign.
(space)
If no sign is going to be written, a blank space is inserted before the value.
#
Used with o, x or X specifiers the value is preceeded with 0, 0x or 0X respectively for values different than zero. Used with a, A, e, E, f, F, g or G it forces the written output to contain a decimal point even if no more digits follow. By default, if no digits follow, no decimal point is written.
0
Left-pads the number with zeroes (0) instead of spaces when padding is specified (see width sub-specifier).
width
an optional * or integer value used to specify minimum width field.
(number)
Minimum number of characters to be printed. If the value to be printed is shorter than this number, the result is padded with blank spaces. The value is not truncated even if the result is larger.
*
The width is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.
.precision
an optional field consisting of a . followed by * or integer or nothing to specify the precision.
.number
For integer specifiers (d, i, o, u, x, X): precision specifies the minimum number of digits to be written. If the value to be written is shorter than this number, the result is padded with leading zeros. The value is not truncated even if the result is longer. A precision of 0 means that no character is written for the value 0. For a, A, e, E, f and F specifiers: this is the number of digits to be printed after the decimal point (by default, this is 6). For g and G specifiers: This is the maximum number of significant digits to be printed. For s: this is the maximum number of characters to be printed. By default all characters are printed until the ending null character is encountered. If the period is specified without an explicit value for precision, 0 is assumed.
.*
The precision is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.
length
an optional length modifier that specifies the size of the argument.
... (additional arguments)
Depending on the format string, the function may expect a sequence of additional arguments, each containing a value to be used to replace a format specifier in the format string (or a pointer to a storage location, for n). There should be at least as many of these arguments as the number of values specified in the format specifiers. Additional arguments are ignored by the function. If a writing error occurs, the error indicator (ferror) is set and a negative number is returned. If a multibyte character encoding error occurs while writing wide characters, errno is set to EILSEQ and a negative number is returned.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
/* print formatted data to stdout by printf() function example */ #include <stdio.h> int main() { char ch; char str[100]; int a; float b; printf("Enter any character \n"); scanf("%c", &ch); printf("Entered character is %c \n", ch); printf("Enter any string ( upto 100 character ) \n"); scanf("%s", &str); printf("Entered string is %s \n", str); printf("Enter integer and then a float: "); // Taking multiple inputs scanf("%d%f", &a, &b); printf("You entered %d and %f", a, b); return 0; }
getegid() Function in C
getgid() returns the real group ID of the calling process. getegid() returns the effective group ID of the calling process. The getegid() function shall always be successful and no return value is reserved to indicate an error. The original Linux getgid() and getegid() system calls supported only 16-bit group IDs. Subsequently, Linux 2.4 added getgid32() and getegid32(), supporting 32-bit IDs. The glibc getgid() and getegid() wrapper functions transparently deal with the variations across kernel versions. On Alpha, instead of a pair of getgid() and getegid() system calls, a single getxgid() system call is provided, which returns a pair of real and effective GIDs. The glibc getgid() and getegid() wrapper functions transparently deal with this.
Syntax for getegid() Function in C
#include <unistd.h> gid_t getegid(void);
Returns the effective group ID (GID). It is always successful. The getegid() function shall always be successful and no return value is reserved to indicate an error. The getgid() and getegid() system calls are expected to conform to ISO/IEC 9945-1:1990 ("POSIX.1").
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/* get the effective group ID by getegid() function code example */ /* * Print the effective group ID of a process */ #include <stdio.h> #include <stdlib.h> #include <sys/types.h> #include <unistd.h> int main( void ) { printf( "get the effective group ID"); printf( "get the group ID"); printf( "My effective group ID is %d\n", getegid() ); printf( "My group ID is %d\n", getegid() ); return EXIT_SUCCESS; }
While Loop Statement in C
While loop is also known as a pre-tested loop. In general, a while loop allows a part of the code to be executed multiple times depending upon a given boolean condition. It can be viewed as a repeating if statement. The while loop is mostly used in the case where the number of iterations is not known in advance. The while loop evaluates the test expression inside the parentheses (). If test expression is true, statements inside the body of while loop are executed. Then, test expression is evaluated again. The process goes on until test expression is evaluated to false. If test expression is false, the loop terminates.
Syntax of While Loop Statement in C
while (testExpression) { // the body of the loop }
• The while loop evaluates the testExpression inside the parentheses (). • If testExpression is true, statements inside the body of while loop are executed. Then, testExpression is evaluated again. • The process goes on until testExpression is evaluated to false. • If testExpression is false, the loop terminates (ends).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
/* while loop statement in C language */ #include<stdio.h> int main() { int n, num, sum = 0, remainder; printf("Enter a number: "); scanf("%d", &n); num = n; // keep looping while n > 0 while( n > 0 ) { remainder = n % 10; // get the last digit of n sum += remainder; // add the remainder to the sum n /= 10; // remove the last digit from n } printf("Sum of digits of %d is %d", num, sum); // signal to operating system everything works fine return 0; }
exit() Function in C
The exit() function is used to terminate a process or function calling immediately in the program. It means any open file or function belonging to the process is closed immediately as the exit() function occurred in the program. The exit() function is the standard library function of the C, which is defined in the stdlib.h header file. So, we can say it is the function that forcefully terminates the current program and transfers the control to the operating system to exit the program. The exit(0) function determines the program terminates without any error message, and then the exit(1) function determines the program forcefully terminates the execution process.
Syntax for exit() Function in C
#include <stdlib.h> void exit(int status)
status
Status code. If this is 0 or EXIT_SUCCESS, it indicates success. If it is EXIT_FAILURE, it indicates failure. The exit function does not return anything. • We must include the stdlib.h header file while using the exit () function. • It is used to terminate the normal execution of the program while encountered the exit () function. • The exit () function calls the registered atexit() function in the reverse order of their registration. • We can use the exit() function to flush or clean all open stream data like read or write with unwritten buffered data. • It closed all opened files linked with a parent or another function or file and can remove all files created by the tmpfile function. • The program's behaviour is undefined if the user calls the exit function more than one time or calls the exit and quick_exit function. • The exit function is categorized into two parts: exit(0) and exit(1).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
/* call all functions registered with atexit and terminates the program by exit() function example */ #include <stdio.h> #include <stdlib.h> int main () { // declaration of the variables int i, num; printf ( " Enter the last number: "); scanf ( " %d", &num); for ( i = 1; i<num; i++) { // use if statement to check the condition if ( i == 6 ) /* use exit () statement with passing 0 argument to show termination of the program without any error message. */ exit(0); else printf (" \n Number is %d", i); } return 0; }
access() Function in C
Determine accessibility of a file. Determines how an HFS file can be accessed. When checking to see if a process has appropriate permissions, access() looks at the real user ID (UID) and group ID (GID), not the effective IDs.
Syntax for access() Function in C
#include <unistd.h> int access(const char *pathname, int how);
pathname
pathname is the name of the file whose accessibility you want to test.
how
The how argument indicates the access modes you want to test. The following symbols are defined in the unistd.h header file for use in the how argument: F_OK: Tests whether the file exists. R_OK: Tests whether the file can be accessed for reading. W_OK: Tests whether the file can be accessed for writing. X_OK: Tests whether the file can be accessed for execution. You can take the bitwise inclusive-OR of any or all of the last three symbols to test several access modes at once. If you are using F_OK to test for the file's existence, you cannot use OR with any of the other symbols. If the specified access is permitted, access() returns 0. If the given file cannot be accessed in the specified way, access() returns -1 and sets errno to one of the following values:
EACCES
The process does not have appropriate permissions to access the file in the specified way, or does not have search permission on some component of the pathname prefix.
EINVAL
The value of how is incorrect.
ELOOP
A loop exists in the symbolic links.
ENAMETOOLONG
pathname is longer than PATH_MAX characters. The PATH_MAX value is determined using pathconf().
ENOENT
There is no file named pathname, or the pathname argument is an empty string.
ENOTDIR
Some component of the pathname prefix is not a directory.
EROFS
The argument how has specified write access for a file on a read-only file system.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
/* determine accessibility of a file by access() function code example */ #include <unistd.h> #include <stdio.h> #include <stdlib.h> int main( int argc, char **argv ) { if( argc!= 2 ) { fprintf( stderr, "use: readable <filename>\n" ); return EXIT_FAILURE; } if( !access( argv[1], R_OK ) ) { printf( "ok to read %s\n", argv[1] ); return EXIT_SUCCESS; } else { perror( argv[1] ); return EXIT_FAILURE; } }
Logical Operators in C
An expression containing logical operator returns either 0 or 1 depending upon whether expression results true or false. Logical operators are commonly used in decision making in C programming. These operators are used to perform logical operations and used with conditional statements like C if-else statements.
&&
Called Logical AND operator. If both the operands are non-zero, then the condition becomes true.
||
Called Logical OR Operator. If any of the two operands is non-zero, then the condition becomes true.
!
Called Logical NOT Operator. It is used to reverse the logical state of its operand. If a condition is true, then Logical NOT operator will make it false.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/* logical operators in C language */ #include <stdio.h> main() { int a = 4; int b = 23; int c ; if ( a && b ) { printf("Line 1 - Condition is true\n" ); } if ( a || b ) { printf("Line 2 - Condition is true\n" ); } /* lets change the value of a and b */ a = 2; b = 8; if ( a && b ) { printf("Line 3 - Condition is true\n" ); } else { printf("Line 3 - Condition is not true\n" ); } if ( !(a && b) ) { printf("Line 4 - Condition is true\n" ); } }


In C Coding, the string entered by the user is stored in variable str. Then, the user is asked to enter the character whose frequency is to be found. This is stored in variable ch. Now,
The above logic is simple & easy to code. But it's lengthy and not optimal to implement. In the above solution we are performing same task for multiple conditions i.e. print 31 days
C Program to performs Comb sort on array of integers. "Comb Sort" is a comparison sorting algorithm. This sort is 'Exchange sort', similar to 'Bubble Sort'. Function to find the new gap