C Programming Code Examples
C > Strings Code Examples
String Programming - Append string: strncat
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
/* String Programming - Append string: strncat */
#include <stdio.h>
#include <string.h>
int main(void)
{
char string1[200], string2[200];
unsigned int len;
gets(string1);
gets(string2);
len = 79 - strlen(string2);
strncat(string2, string1, len);
printf(string2);
return 0;
}
strlen() Function in C
Get string length. Returns the length of the C string str. The length of a C string is determined by the terminating null-character: A C string is as long as the number of characters between the beginning of the string and the terminating null character (without including the terminating null character itself).
Syntax for strlen() Function in C
#include <string.h>
size_t strlen ( const char * str );
str
C string
Function returns the length of string.
This should not be confused with the size of the array that holds the string.
strlen() function is defined in string.h header file. It doesn't count null character '\0'.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
/* get the length of the C string str by strlen() function example */
/* Program to find the total length of a String using strlen() */
#include<stdio.h>
#include<string.h>
int main()
{
char str1[10]= "01234567"; /* First string */
printf("First String is %s",str1);
printf("\n");
int length = strlen(str1);
printf("Length of first String is %d", length);
printf("\n");
char str2[20]= "String Chapter"; /* Second string */
printf("Second String is %s",str2);
printf("\n");
length = strlen(str2);
printf("Length of second String is %d", length);
return 0;
}
gets() Function in C
Get string from stdin. Reads characters from the standard input (stdin) and stores them as a C string into str until a newline character or the end-of-file is reached.
The newline character, if found, is not copied into str.
A terminating null character is automatically appended after the characters copied to str.
Notice that gets is quite different from fgets: not only gets uses stdin as source, but it does not include the ending newline character in the resulting string and does not allow to specify a maximum size for str (which can lead to buffer overflows).
The gets() function enables the user to enter some characters followed by the enter key. All the characters entered by the user get stored in a character array. The null character is added to the array to make it a string. The gets() allows the user to enter the space-separated strings. It returns the string entered by the user.
Syntax for gets() Function in C
#include<stdio.h>
char * gets ( char * str );
str
Pointer to a block of memory (array of char) where the string read is copied as a C string.
On success, the function returns str.
If the end-of-file is encountered while attempting to read a character, the eof indicator is set (feof). If this happens before any characters could be read, the pointer returned is a null pointer (and the contents of str remain unchanged).
If a read error occurs, the error indicator (ferror) is set and a null pointer is also returned (but the contents pointed by str may have changed).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
/* read characters from the standard input (stdin) and stores them as a C string */
#include<stdio.h>
#include<conio.h>
#include<stdlib.h>
void main()
{
clrscr();
FILE *fp;
char fname[20];
printf("Enter filename : ");
gets(fname);
fp=fopen(fname, "r");
if(fp==NULL)
{
printf("Error in opening the file..!!\n");
printf("Press any key to exit..\n");
getch();
exit(1);
}
fclose(fp);
getch();
}
#include Directive in C
#include is a way of including a standard or user-defined file in the program and is mostly written at the beginning of any C/C++ program. This directive is read by the preprocessor and orders it to insert the content of a user-defined or system header file into the following program. These files are mainly imported from an outside source into the current program. The process of importing such files that might be system-defined or user-defined is known as File Inclusion. This type of preprocessor directive tells the compiler to include a file in the source code program. Here are the two types of file that can be included using #include:
• Header File or Standard files: This is a file which contains C/C++ function declarations and macro definitions to be shared between several source files. Functions like the printf(), scanf(), cout, cin and various other input-output or other standard functions are contained within different header files. So to utilise those functions, the users need to import a few header files which define the required functions.
• User-defined files: These files resembles the header files, except for the fact that they are written and defined by the user itself. This saves the user from writing a particular function multiple times. Once a user-defined file is written, it can be imported anywhere in the program using the #include preprocessor.
Syntax for #include Directive in C
#include "user-defined_file"
#include <header_file>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
/* #include directive tells the preprocessor to insert the contents of another file into the source code at the point where the #include directive is found. */
// C program to illustrate file inclusion
// <> used to import system header file
#include <stdio.h>
// " " used to import user-defined file
#include "process.h"
// main function
int main()
{
// add function defined in process.h
add(10, 20);
// mult function defined in process.h
multiply(10, 20);
// printf defined in stdio.h
printf("Process completed");
return 0;
}
strncat() Function in C
Append characters from string. Appends the first num characters of source to destination, plus a terminating null-character.
If the length of the C string in source is less than num, only the content up to the terminating null-character is copied.
Appends a number of characters from one string to another. The strncat() function copies up to num characters of the string addressed by the second pointer argument, source, to the location following the string addressed by the first pointer, destination. the first character of source is copied over the null character that terminates the string addressed by destination.
Syntax for strncat() Function in C
#include <string.h>
char * strncat ( char * destination, const char * source, size_t num );
destination
Pointer to the destination array, which should contain a C string, and be large enough to contain the concatenated resulting string, including the additional null-character.
source
C string to be appended.
num
Maximum number of characters to be appended. size_t is an unsigned integral type.
The function returns the value of its first argument, which points to the resulting string. The locations that strncat() reads from and writes to must not overlap. Unlike strcat(), strncat() has a third parameter, num, to limit the length of the string written. The strncat() function stops copying when it has copied num characters, or when it reaches a terminating null character in the source string, whichever occurs first. In either case, strncat() appends a null character to the concatenated string addressed by destination. The string's length thus increases by at most num characters.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
/* append characters from string by strncat() function code example */
#include <stdio.h>
#include <string.h>
int main () {
char str1[50], str2[50];
//destination string
strcpy(str1, "This is my initial string");
//source string
strcpy(str2, ", add this");
//displaying destination string
printf("String after concatenation: %s\n", strncat(str1, str2, 5));
// this should be same as return value of strncat()
printf("Destination String str1: %s", str1);
return 0;
}
main() Function in C
In C, the "main" function is treated the same as every function, it has a return type (and in some cases accepts inputs via parameters). The only difference is that the main function is "called" by the operating system when the user runs the program. Thus the main function is always the first code executed when a program starts.
main() function is a user defined, body of the function is defined by the programmer or we can say main() is programmer/user implemented function, whose prototype is predefined in the compiler. Hence we can say that main() in c programming is user defined as well as predefined because it's prototype is predefined.
main() is a system (compiler) declared function whose defined by the user, which is invoked automatically by the operating system when program is being executed.
Its first function or entry point of the program from where program start executed, program's execution starts from the main. So main is an important function in c , c++ programming language.
Syntax for main() Function in C
void main()
{
.........
// codes start from here
.........
}
void
is a keyword in C language, void means nothing, whenever we use void as a function return type then that function nothing return. here main() function no return any value.
In place of void we can also use int return type of main() function, at that time main() return integer type value.
main
is a name of function which is predefined function in C library.
• An operating system always calls the main() function when a programmers or users execute their programming code.
• It is responsible for starting and ends of the program.
• It is a universally accepted keyword in programming language and cannot change its meaning and name.
• A main() function is a user-defined function in C that means we can pass parameters to the main() function according to the requirement of a program.
• A main() function is used to invoke the programming code at the run time, not at the compile time of a program.
• A main() function is followed by opening and closing parenthesis brackets.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
/* basic c program by main() function example */
#include <stdio.h>
#include <conio.h>
main()
{
printf (" It is a main() function ");
int fun2(); // jump to void fun1() function
printf ("\n Finally exit from the main() function. ");
}
void fun1()
{
printf (" It is a second function. ");
printf (" Exit from the void fun1() function. ");
}
int fun2()
{
void fun1(); // jump to the int fun1() function
printf (" It is a third function. ");
printf (" Exit from the int fun2() function. ");
return 0;
}
printf() Function in C
Writes the C string pointed by format to the standard output (stdout). If format includes format specifiers (subsequences beginning with %), the additional arguments following format are formatted and inserted in the resulting string replacing their respective specifiers.
printf format string refers to a control parameter used by a class of functions in the input/output libraries of C programming language. The string is written in a simple template language: characters are usually copied literally into the function's output, but format specifiers, which start with a % character, indicate the location and method to translate a piece of data (such as a number) to characters. "printf" is the name of one of the main C output functions, and stands for "print formatted". printf format strings are complementary to scanf format strings, which provide formatted input (parsing). In both cases these provide simple functionality and fixed format compared to more sophisticated and flexible template engines or parsers, but are sufficient for many purposes.
Syntax for printf() function in C
#include <stdio.h>
int printf ( const char * format, ... );
format
C string that contains the text to be written to stdout.
It can optionally contain embedded format specifiers that are replaced by the values specified in subsequent additional arguments and formatted as requested.
A format specifier follows this prototype: [see compatibility note below]
%[flags][width][.precision][length]specifier
Where the specifier character at the end is the most significant component, since it defines the type and the interpretation of its corresponding argument:
specifier
a conversion format specifier.
d or i
Signed decimal integer
u
Unsigned decimal integer
o
Unsigned octal
x
Unsigned hexadecimal integer
X
Unsigned hexadecimal integer (uppercase)
f
Decimal floating point, lowercase
F
Decimal floating point, uppercase
e
Scientific notation (mantissa/exponent), lowercase
E
Scientific notation (mantissa/exponent), uppercase
g
Use the shortest representation: %e or %f
G
Use the shortest representation: %E or %F
a
Hexadecimal floating point, lowercase
A
Hexadecimal floating point, uppercase
c
Character
s
String of characters
p
Pointer address
n
Nothing printed. The corresponding argument must be a pointer to a signed int. The number of characters written so far is stored in the pointed location.
%
A % followed by another % character will write a single % to the stream.
The format specifier can also contain sub-specifiers: flags, width, .precision and modifiers (in that order), which are optional and follow these specifications:
flags
one or more flags that modifies the conversion behavior (optional)
-
Left-justify within the given field width; Right justification is the default (see width sub-specifier).
+
Forces to preceed the result with a plus or minus sign (+ or -) even for positive numbers. By default, only negative numbers are preceded with a - sign.
(space)
If no sign is going to be written, a blank space is inserted before the value.
#
Used with o, x or X specifiers the value is preceeded with 0, 0x or 0X respectively for values different than zero. Used with a, A, e, E, f, F, g or G it forces the written output to contain a decimal point even if no more digits follow. By default, if no digits follow, no decimal point is written.
0
Left-pads the number with zeroes (0) instead of spaces when padding is specified (see width sub-specifier).
width
an optional * or integer value used to specify minimum width field.
(number)
Minimum number of characters to be printed. If the value to be printed is shorter than this number, the result is padded with blank spaces. The value is not truncated even if the result is larger.
*
The width is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.
.precision
an optional field consisting of a . followed by * or integer or nothing to specify the precision.
.number
For integer specifiers (d, i, o, u, x, X): precision specifies the minimum number of digits to be written. If the value to be written is shorter than this number, the result is padded with leading zeros. The value is not truncated even if the result is longer. A precision of 0 means that no character is written for the value 0.
For a, A, e, E, f and F specifiers: this is the number of digits to be printed after the decimal point (by default, this is 6).
For g and G specifiers: This is the maximum number of significant digits to be printed.
For s: this is the maximum number of characters to be printed. By default all characters are printed until the ending null character is encountered.
If the period is specified without an explicit value for precision, 0 is assumed.
.*
The precision is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.
length
an optional length modifier that specifies the size of the argument.
... (additional arguments)
Depending on the format string, the function may expect a sequence of additional arguments, each containing a value to be used to replace a format specifier in the format string (or a pointer to a storage location, for n).
There should be at least as many of these arguments as the number of values specified in the format specifiers. Additional arguments are ignored by the function.
If a writing error occurs, the error indicator (ferror) is set and a negative number is returned.
If a multibyte character encoding error occurs while writing wide characters, errno is set to EILSEQ and a negative number is returned.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
/* print formatted data to stdout by printf() function example */
#include <stdio.h>
int main()
{
char ch;
char str[100];
int a;
float b;
printf("Enter any character \n");
scanf("%c", &ch);
printf("Entered character is %c \n", ch);
printf("Enter any string ( upto 100 character ) \n");
scanf("%s", &str);
printf("Entered string is %s \n", str);
printf("Enter integer and then a float: ");
// Taking multiple inputs
scanf("%d%f", &a, &b);
printf("You entered %d and %f", a, b);
return 0;
}
C code accept records of the different states using array of structures. A structure should contain Char state, population, literacy rate, & income. Display the State whose Literacy
We use bitwise OR | operator to set any bit of a number. C Bitwise OR operator evaluate each bit of the resultant value to 1 if any of the operand corresponding bit is 1. Input the
Program find number of words, blank spaces, Special symbols, Digits, "Vowels" by pointers. We are going to accept string use 'gets()'. We are not using scanf() to accept string because
C function 'compares' the two strings, returns an integer value. If both the strings are 'same' then this function would return 0 otherwise it may return a negative or positive value based
C programming code to reverse the digits of a number in 3 steps. Store number in form of string. Reverse string using strrev function. Convert string to number. Printing reversed
This C Program takes an arithmetic operator +, -, *, / and two operands from the user and Performs the Calculation on the 2 operands depending upon the operator entered by the
